Automatic Wall Cement Plastering Machine Rendering Machine With High Quality

Product Description

Features:
  1. The new model removes the way of conveying the ash from the conveyor belt, and changes to the graying mode of the graying plate. It can fully reflect the rapid movement of the plastering machine, quickly locate, and it is convenient and quick to enter and exit the narrow door. The construction can be completely wiped to the top (1 mm is not left), which is impossible for any other manufacturer. The machine can be manually controlled to stop or supply ash at any position. The window is up and down, the plaster above the door is at least 50cm away from the door and window, and the ash can be intermittently sent to reduce the falling ash on the way.
  2. Use a smear that can change the angle, lift the wall at a large angle, and lower the angle with a small angle to achieve the original underground machine. Only in this way can the wall surface be zero-error and completely wiped to the top. Other manufacturers have 50cm from the top and can't wipe it. The dead slab and the machine must be loosened and fixed to leave the wall to get down (dangerous). There is no guarantee that the wall surface will be smooth and smooth, and the wiper that can change the angle is unique to our company.
 3. using the hydraulic telescopic rod, top and top, can fix the machine in ten seconds, and the chassis is not forced, the mobile machine just needs to be released like a jack, the main pole is down by its own weight, the foot Automatically lifted, this method is the fastest and strongest. Other manufacturers can't do it.
4. The width of the wiper is designed according to the doorway of the suite (80cm). It is 3cm wider than the fuselage and can be freely entered into the inner and outer houses. The yin and yang angles are completely in place, which cannot be achieved by other manufacturers.
5. There are two micro vibrators on the back of the wiper. You don't have to worry about empty drums and wall forces.
6. This machine is equipped with a sealed universal wheel that can be easily moved to wherever you want to go.
7, completely imitating the artificial design of the artificial. The wiper and the wall form a plastering angle. There are two vibrators behind the wiper. When the lifter is raised, the vibrator automatically opens. The conveyor belt continuously feeds the ash into the wiper. The conveyor belt from the top 45cm automatically stops the supply of ash because it passes. Calculate, the ash of the mouth is enough to wipe the top, the screed automatically changes the angle, automatically or manually down to the top, and automatically stops.

Machine operation mode
1. Ways of transporting ash forward and upward
2. can change the angle of the wiper
3. using the way of telescopic poles, top and top

wall plaster machine Scope of application
This machine is an ideal equipment for plastering of residential buildings, office buildings and indoor hardened indoor vertical walls.
Can be painted wall: cement wall, brick wall, hollow wall, light brick wall, burn-free brick wall and so on.
Applicable ash is: white sand ash, stone powder, cement powder, foaming mortar, dry powder mortar, gypsum, etc.
The thickness of the plaster is 3cm or less, and the height of the wall can be used up to 5m.

Safety design protection
1 Before the wiper is changed to the plastering angle, the machine will not start when the start switch is turned on to avoid scratching the wiper.
2. If the motor is reversed during start-up, the machine will automatically cut off the power supply, protect the wire rope from chaos, and reverse the switch.
3, the machine drops the card automatically cut off the power to protect the wire rope will not mess.
4, the wire rope is exposed, it is found that the rough will be replaced in time, if there is a broken rope, the machine will be stuck at an abnormal speed of 20cm.
5. All the activities and fastening wires are treated with anti-rust treatment. All the bearings are sealed by multiple layers. All the accessories are from the best enterprises in China. Strive to create the most suitable, most efficient, best quality, globally advanced machinery.
6 The front of the machine design is heavy, even if the hydraulic oil is loose, it will not fall backwards.

Instructions for use
1. Before use, it is necessary to make a cloudy wall one day in advance. Do not use a dirty wall, such as a cement wall.
2, before using the wall, you must first do some nailing or nailing. Practice 1, the bottom is 18cm away from the ground, one point two meters, one point 80cm at the top. The advantage of this method is that one person can operate, and the error is zero and the speed is fast. Practice 2, the bottom is 18cm away from the ground, two meters, one middle two meters, two people operate, one person holding the matching square tube attached to the central point, the other person puts the branch between the square tube and the pole, so The method is zero error vertically, and is horizontally within 2mm.
3. The machine has been adjusted for flatness and locked before leaving the factory. Do not adjust without error.
4. Fix the machine indoors for a dry run.
5. Place the bottom pipe on the hit point, push the machine to the wall, make the chassis tentacles close to the square tube, and the sky beam top wire climbs to the top point or the other hand holds the square tube to the middle point. Put the stick between the pole and the square tube and press the hydraulic pressure. From the transfer to the fixed process, the practice 2 takes only 10 seconds and the practice 1 is faster.
6. Fill the ash bucket and the trowel. Note that it is forbidden to fill the ash around the two poles. The amount of ash is determined according to the height of the room and the thickness of the slab. Generally, the wall is 2.85 meters, the thickness of 2cm is enough, and there is no need for the middle. Add ash.
7. If the point starts the switch and the motor stops automatically within 1 second, it means that the motor is reversed and the reverse switch can be commutated.
8. Click the start button to open the plaster and the vibrator at the same time. On the way of the rise, the conveyor belt can be manually controlled to reduce the ash. When the top is 50cm, the ash is stopped and the screed automatically changes the angle. When the top stops automatically or automatically, the vibration will stop automatically. If the ash-deficient machine will stop or stop in advance, if the card machine is lowered, the mechanical ash will automatically cut off the power to protect the wire rope from chaos, and the machine will stop automatically. A working cycle from A to B is only 2 minutes to 2.5 minutes.

Customized Service

 1. Products 

      Some of our products can be customized, if you want to know your demand products whether can be customized, just contact with our Salers, they will reply you as soon as they got your message  or mail, so if you want to know the products about customize or not, pls do not hesitate to ask.

 2. Service   

    In order to keep the customer can smooth communication, one foreign customer has his or her one-on-one service as soon as the business start,

Butif you are not satisfied your one-on-on service, you can contact with our General manager ask for exchange your one-on-one service any time.

Newest Products

We will update new products, if had any interested, just notice this part.

    You can contact our trade manager at any time. Your problems can be responsed in 12 hours can we will give you solutions in 24 hours. Also if there's any problem about our products' quality, we accept resending them again. Thank you.