Groundnut Shelling machine /Diesel Peanut Husk Removing Machine

Product Description

Working process of peanut sheller:

 Peanut fruit artificial feeding, first fell on the crude Wen gate, fall through grid text plate rotational rubbing force between fixed the trash rack concave plate, peanut shells peel separation peanut shell,through duct the most peanut shell blowing hit by the wind machine, with peanuts and peanut small part has not been stripped fruit falling into the proportion of the sorting screen, after re-screening, peanuts line separating screen surface by material mouth into the sacks, but have not yet stripped peanuts (small fruit) from the screen surface downstream, after the material crossing into the hoist, and then from the elevator into the fine lines gate secondary sheller proportion of branches, and then after screening election, you can reach all the peel.

 Requirements:
 
Shelling machine three requirements
1) shelling clean, high productivity, the removal of the device shelling machine, also requires a higher degree of cleanliness.
2) low loss rate, broken rate is small.
3) simple structure, the use of reliable, easy to adjust, low power consumption, there is a certain degree of versatility, can take off a variety of crops to improve the utilization of the machine.
 
Peanut two requirements
 
Peanut dry and wet appropriate, too dry is broken high; over wet is the impact of work efficiency. Rural storage of peanuts (fruits) are generally more dry, in order to make it suitable for wet and dry the following methods can be used.
1) winter shelling. Before the shell with 10kg of warm water evenly sprayed on 50kg of fruit, and covered with plastic film for about 10 hours, and then in the sun about 1 hour or so to start shelling, other seasons covered with plastic film for 6 Hour or so, the rest are the same.
2) can be more dry peanuts (fruit) immersed in a large pool, soaked immediately after the cover and covered with plastic film about 1 day, and then in the sun under the sun, until the wet and wet after the start shelling.
 
Motor requirements
 
Single-phase motor to work properly, the voltage must reach its rated voltage. In rural areas, there is only one transformer in the village, and the household is scattered. In addition, the wires and circuits used are not very standard, so that the voltage of the users far from the transformer is insufficient. Therefore, the workplace should be located close to the transformer.

Newest Products

We will update new products, if had any interested, just notice this part.

Pre-sale service
1.Related machines’s technical parameter will be supplied to customer.
2.According to customer’s factory size, factory layout can be provided in advance.

3. According to customer’s material cost, general formulation can be prepared well.
4.Special machine can be supplied as customer’s request.
5.Professional Advice about Market, machines, processing , materials, packing can be supplied
 6. Suggesting professional ship agent or helping book ship as customer request. 

 After sale service:

1.Allocation chart as the buyer’s request will be supplied. 
2.Operation manual will be supplied after shipment.
3.One year warrantee, life time maintenance with cost price.
4.Free easy broken spare parts will be sent with container .
5.First installation can be done by engineer.
6.Training workers in customer’s factory.

If you had any problem, just feel free to contact with us.

Any time, we will reply you as soon as possible!